Compatible Systems MicroRouter 900i Guía de instalación descargar pdf (Pagina 11)

Chapter 2 - Quickstart Configuration 7

PPP Configuration

This section covers the settings required for PPP (point-to-point) protocol operation of the DS3

WAN interface.

Internal DS3 CSU/DSU Link Configuration

Required for Dedicated Line Operation

This is the only mode of operation supported via the built-in DS3 CSU/DSU.

• Set Dedicated connection

• Set PPP connection

CV: Use the Link Configuration: WAN Dialog Box.

TB: Use configure and then set the Mode and ConnectMode keywords in the Link Config

WAN 0 section.

Suggested for Dedicated Line Operation

Dedicated line operation generally does not require additional parameters for operation.

IP Protocol

Required for IP

WAN interfaces which are set for PPP operation do not generally use an IP address. They are

set to act as an “unnumbered interface.” In this mode of operation, there are no required

settings.

Suggested for IP

These parameters help supply information about the segment that the interface is connected to.

With this information, routing can take place.

• Set IP RIP 1, IP RIP 2, OSPF (Open Shortest Path First) or BGP (Border Gateway

Protocol)

• Set IP static routes

CV: Use the TCP/IP Routing: WAN Dialog Box to set RIP, and the IP Static Routing Dialog

Box (under Global/IP Static Routes) to set static routes. OSPF and BGP can only be config-

ured using text-based configuration.

TB: Use configure and set either the RIPVersion keyword or the OSPFEnabled keyword in

the IP WAN 0 section. Add static routes and a default router in the IP Static section.

Note: Due to the complexity of BGP, configuration parameters for BGP are not given in this

Quickstart. For help with BGP configuration parameters, and other configuration questions,

refer to the Tech Support pages on the Compatible Systems Web site at:

http://www.compatible.com/.

IPX Protocol

Required for IPX

WAN interfaces which are set for PPP operation do not generally use an IPX address. They are

set to act as an “unnumbered interface.” In this mode of operation, there are no required

settings.

AppleTalk Protocol

Required for AppleTalk

WAN interfaces which are set for PPP operation do not generally use an AppleTalk address.

They are set to act as an “unnumbered interface.” In this mode of operation, there are no

required settings.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Comentarios a estos manuales

Sin comentarios

More products and manuals for CD players Philips

Models	Document Type
DVDQ40/022	User Manual Philips DVDQ40/022 User's Manual, 26 pages
AZ382/12	User Manual Philips AZ382/12 User's Manual, 2 pages
MZ1000	User Manual Philips MZ1000 User's Manual, 25 pages
EXP4318	User Manual Philips EXP4318 User's Manual, 82 pages
AZT3201	User Manual Philips AZT3201 User's Manual, 10 pages
ACT 7585	User Manual Philips ACT 7585 User's Manual, 65 pages
AZ3012/01	User Manual Philips AZ3012/01 User's Manual, 8 pages
eXpanium EXP212	User Manual Philips eXpanium EXP212 User's Manual, 2 pages
AZ 1565/00	User Manual Philips AZ 1565/00 User's Manual, 63 pages
AZT3200	User Manual Philips AZT3202/17 User manual, 14 pages
EXP2550/58	User Manual Philips EXP2550/58 User manual, 2 pages
EXP3360	User Manual Philips EXP3360 User's Manual, 12 pages
AZ7681	User Manual Philips AZ7681 User's Manual, 132 pages
EXP220/01	User Manual Philips EXP220/01 User manual, 5 pages
PORTABLE SPORT AUDIO PSA[CD	User Manual Philips PORTABLE SPORT AUDIO PSA[CD User's Manual, 14 pages
AX5311/17	User Manual Philips AX5311/17 User manual, 13 pages
AZ7182	User Manual Philips AZ7182 User's Manual, 2 pages
AZ2000/01	User Manual Philips AZ2000/01 User's Manual, 11 pages
AX5301/00C	User Manual Philips AX5301/00C User's Manual, 2 pages
AZ 1145	User Manual Philips AZ 1145 User's Manual, 53 pages