DECrouter 250, Version 1.1 SSA 32.15.02-A
Within the UK, an additional adapter cable is needed to
allow connection to the British Telecom Kilostream as
listed:
BC22X-02
Note: The DSRVR has six 25-pin V.24/V.28 (RS232-D)
ports that do not need an adapter cable. The DSRVJ
has one 25-pin V.24/V.28 (RS232-D) port that does not
need an adapter cable.
Disk Space Requirements — VMS
Disk Space Requirements (Block Cluster Size = 1):
Disk space required for installation: 2,850 blocks
(1,425 Kbytes)
Disk space required for use (permanent): 2,780 blocks
(1,390 Kbytes)
Disk Space Requirements — ULTRIX
For VAX-Based and RISC-Based Systems:
Disk space required for installation:
Root file system: /0 Kbytes
Other file systems: /usr 1,020 Kbytes (VAX)
Other file systems: /usr 1,110 Kbytes (RISC)
/var 0 Kbytes
Disk space required for use (permanent):
Root file system: /0 Kbytes
Other file systems: /usr 1,010 Kbytes (VAX)
Other file systems: /usr 1,100 Kbytes (RISC)
/var 0 Kbytes
For DOS Systems:
Disk space required for installation: 1,235 Kbytes
These counts refer to the disk space required on the
system disk. The sizes are approximate; actual sizes
may vary depending on the user’s system environment,
configuration, and software options.
OPTIONAL HARDWARE
Modems Supported
DEC DF03, DF112, and DF224
Hayes® SmartModem 2400™
CODEX 2233/2260
CLUSTER ENVIRONMENT (VMS only)
This layered product is fully supported when installed on
any valid and licensed VAXcluster* configuration without
restrictions. The
HARDWARE REQUIREMENTS
sec-
tions of this product’s Software Product Description and
System Support Addendum detail any specific hardware
required by this product.
* V5.x VAXcluster configurations are fully described
in the VAXcluster Software Product Description
(29.78.xx) and include CI, Ethernet, and Mixed In-
terconnect configurations.
SOFTWARE REQUIREMENTS
For each VMS System acting as a load host or dump
receiver:
VMS Operating System V5.0 - V5.4
DECnet-VAX V5.0 - V5.4 (either end-node or full-
function)
For each VAX/ULTRIX System acting as a load host or
dump receiver:
ULTRIX Operating System V4.0 - V4.1
DECnet-ULTRIX V4.0
For each RISC/ULTRIX system acting as a load host or
dump receiver:
ULTRIX Operating System V4.0 - V4.1
DECnet-ULTRIX V4.0
For each DOS System acting as a load host or dump
receiver:
One of the following Operating systems:
COMPAQ DOS V3.31, V4.0, V4.01
DECstation DOS V3.3, V4.0
IBM DOS V3.3, V4.0
Olivetti DOS V3.3, V4.0, V4.01
Tandy DOS V3.30, V4.01
Toshiba DOS V3.3 (R3C90US), V4.01 (R4A15US)
Zenith DOS V3.3+, V4.0, V4.01
DECnet PCSA Client for DOS V3.0
PATHWORKS for DOS, V4.0
VMS Tailoring (VMS only)
For VMS V5.x systems, the following VMS classes are
required for full functionality of this layered product:
• VMS Required Saveset
• Network Support
3
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales