Compatible Systems MicroRouter 1200i Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 41
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
GORAMO – Janusz Górecki
MultiLink Router and MikroRouter
www.goramo.com.pl
p
age 27 from 41
4.14
Traffic Manager - limiting bandwidth
Traffic Manager tab allows you to limit bandwidth transmission of data to selected users.
Functionality to configure by entering the table limits the amount of transferred data and the criteria
for computers, these limits apply. In each row of the table are the criteria for determining the
computers affected by the limitation contained in the row. These criteria are the IP addresses of
computers or the MAC address of a particular computer. In the IP Address field, define a specific IP
address or their entire class by adding "/" + netmask bits quantity. If you want to criterion was met by
any IP address - enter „*”. In the MAC Address field you can enter „*”, address 00:00:00:00:00:00 or
particulars computer MAC address, which alone is to meet the criterion of limitations.
Bandwidth limit specifying how much data can be downloaded within seconds for computers
meeting the criterion (downlink), how much data can send per second (UpLink), and how many
packets per second can (together) to send and receive. Inserting the value of „0” will limit will no
longer exist (if we wanted to block the route packets to the computer, use the tab Firewall/Forward
(point 4.13.1).
Field
Acceptable Values Field description
MAC Address
„*”
or a specific MAC address of
specific computer in the format XX:
XX: XX: XX: XX: XX, where XX is
a hexadecimal number.
„*”
- indicates that the criteria for verifying
the router does not pay any attention to the
MAC Address, enter your address causes of
choosing a particular computer.
IP Address
A specific IP address or class
(network) IP addresses as IP / MASK
(eg: 192.168.0.0/24)
Selects computers to limit bandwidth by IP
addresses.
Protocol
You can choose the value of the TCP,
UDP, ICMP, and ALL
Determine which protocol is specifically
restricted
DownLink
(kbps)
0 – 999999
How many kilobits per second can receive
computers meeting the criterion
UpLink (kbps) 0-999999
How many kilobits per second can send
computers to satisfy the test.
PPS (Packets
Per Sec.)
0-99999
How many packets per second can send and
receive computers that meet the criterion
Comment
A string of 64 characters
Comment
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Comentarios a estos manuales

Sin comentarios