Compatible Systems MicroRouter 1200i Manual de usuario descargar pdf (Pagina 32)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

[email protected]

age 32 from 41

Typed scripts can be performed on one of three ways:

• On – PowerUp

• Pre – Configuration

• Post – Configuration, in this case the script complements the functionality of the GUI that is

not supported

After entering the script, press the Save changes to make changes to the router's RAM that has

been done to further press the Apply changes. In addition, the changes are saved after the power is

turned off, press the Write to Flash.

4.23

Software Update GUI

Please download from www.goramo.com.pl current version of the graphical user interface. Put it

on your computer to a directory whose full name does not include Polish characters and is not longer

than 60 characters. Recommended is the main directory of a hard drive of your computer.

After recording the file, go to Software Update tab and using the Browse button, indicate the

previously downloaded version of the graphical user interface. Then click Software Update. After

loading the software into router RAM, a message indicates that the software was downloaded and

asked to confirm your intention to update the software.

" Successfully uploaded release-file, continue update?"

Should be confirmed by selecting the button:

" Yes, install New release ".

The new software version will be recorded on the device. Now we can do nothing else but to see if it

works - and if it works correctly - write to Flash memory by selecting: Write to Flash.

5 Manual MicroRouter text menu over the console (only

for MicroRouter)

To fully exploit all the advantages and MicroRouter opportunities need to know Linux system.

Starting in front of users, however, not know this system has been preset frequently used functions

available via the console and the text menu:

1. Setting MicroRouter to work in bridge mode (hide the IP address)

Eth: on both Modems, Converters E1etc. set mode "Bridge Ethernet (eth0) and over hdlc0 hdlc1"

2. Go to the router mode - that is, IP address and unlock the ability to configure the Web browser.

3. Go to the Linux system console mode - allowing the use of additional operating system functions

not implemented in the version of the web browser configuration.

4. Log out

After connecting the console to a socket system asks the user for username and password (if the

connection was held at the operating system, press Ctrl + D):

multilink login: root

Password: goramo1234

Message displayed when you boot the console port:

Welcome to Text User Interface (TextUI) of MultiLink-MR Router (Micro-

Router).

Chose option:

1. Set to and configure Bridge Operation Mode;

2. Set to Router Operation Mode;

3. Go to console;

4. Logout.

It is point for two this same devices eg. Modems, Converters E1 installed on the link

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 40 41

Comentarios a estos manuales

Sin comentarios

Compatible Systems MicroRouter 1200i Manual de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Compatible Systems MicroRouter 1200i