Compatible Systems RISC 2800i Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
MPC7447A RISC Microprocessor Hardware Specifications, Rev. 5
Freescale Semiconductor 19
Electrical and Thermal Characteristics
5.2.3 IEEE 1149.1 AC Timing Specifications
Table 10 provides the IEEE 1149.1 (JTAG) AC timing specifications as defined in Figure 16 through
Figure 19.
Figure 7
provides the AC test load for TDO and the boundary-scan outputs of the MPC7447A.
Figure 7. Alternate AC Test Load for the JTAG Interface
Table 10. JTAG AC Timing Specifications (Independent of SYSCLK)
1
At recommended operating conditions. See Table 4.
Parameter Symbol Min Max Unit Notes
TCK frequency of operation f
TCLK
0 33.3 MHz
TCK cycle time t
TCLK
30 ns
TCK clock pulse width measured at 1.4 V t
JHJL
15 ns
TCK rise and fall times t
JR
and t
JF
—2ns
TRST
assert time t
TRST
25 ns 2
Input setup times:
Boundary-scan data
TMS, TDI
t
DVJH
t
IVJH
4
0
ns 3
Input hold times:
Boundary-scan data
TMS, TDI
t
DXJH
t
IXJH
20
25
ns 3
Valid times:
Boundary-scan data
TDO
t
JLDV
t
JLOV
4
4
20
25
ns 4
Output hold times:
Boundary-scan data
TDO
t
JLDX
t
JLOX
30
30
ns 4
TCK to output high impedance:
Boundary-scan data
TDO
t
JLDZ
t
JLOZ
3
3
19
9
ns 4, 5
Notes:
1. All outputs are measured from the midpoint voltage of the falling/rising edge of TCLK to the midpoint of the signal
in question. The output timings are measured at the pins. All output timings assume a purely resistive 50-Ω load
(see Figure 7). Time-of-flight delays must be added for trace lengths, vias, and connectors in the system.
2. TRST
is an asynchronous level sensitive signal. The time is for test purposes only.
3. Non-JTAG signal input timing with respect to TCK.
4. Non-JTAG signal output timing with respect to TCK.
5. Guaranteed by design and characterization.
Output
Z
0
= 50 Ω
OV
DD
/2
R
L
= 50 Ω
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Comentarios a estos manuales

Sin comentarios