Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 10)

10 - Safety Features - Section 2 Microrouter CNC Machine User's Manual

2: Safety Features Overview and Precautions

Safety Features Overview.

The following safety features are standard on your Microrouter CNC

machine:

• Emergency stop button.

• Manually operated, totally enclosed guard door with interlock switch.

• Option on control software to check CNC programs using

toolpath graphics, prior to machining.

• Automatic tool retraction & spindle stop for tool changing.

Safety Precautions.

Safety is very important when working with all forms of machinery

but particularly when working with CNC equipment, due to the

hazardous voltages, speeds and forces that exist in the hardware.

Follow the rules below at all times, when using your Microrouter

CNC machine.

General Safety Precautions :

• Wear clothing suitable for machine operation and follow the safe

working procedures in place at your establishment.

• Do not place any objects so that they interfere with the guards or

the operation of the machine.

• Never try to clean the machine if any part of it is rotating or in

motion.

• Always secure the work on the table or in a fixture or vice.

• Ensure that the correct cable for the power source is used.

• Ensure the mains power is switched off (and preferably

unplugged) before starting any maintenance work on the

machine. Post a notice informing others not to use the machine

since it is undergoing maintenance.

• Hazardous voltages can still exist immediately after switching the

machine off. Always wait at least 5 minutes before accessing the

electrical control panels.

• If power fails turn off the mains power switch immediately and

unplug the machine from the mains power socket.

• Lubricate the required machine areas at the intervals specified in

this manual, to prevent the axes from seizing (see the

Maintenance section for further details).

• Observe caution when adding or removing machine tooling.

• When an emergency stop is required, press the circular red

emergency stop button, located on the right front panel of the

machine.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 10