Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 35)

Section 5 - Preparing Tooling Hardware - 35Microrouter CNC Machine User's Manual

5: Removing the Laminate Trimmer from the

Machine Head

Left: Turn

anticlockwise

to release

clamp.

Location

Look at front of machine

head.

2) Lift up the front brush guard to gain access to the laminate

trimmer clamping bracket allen bolt.

3) Release the laminate trimmer clamp, using the allen bolt located

on the front left side of the clamping bracket. Using a 5mm allen

key, loosen the clamping bracket bolt by turning it in an

anticlockwise direction.

4) Remove the laminate trimmer vertically from the clamping

bracket, taking care not to hit any cutting tool on any machine

fittings. Transfer the laminate trimmer assembly to a suitable

workbench to carry out the tool change.

Location

Look at front of machine

head.

Above: Lift the front

brush guard.

Above: Laminate trimmer clamping

bracket allen bolt (circled).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 35