Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 32)

32 - Preparing Tooling Hardware - Section 5 Microrouter CNC Machine User's Manual

5: Performing a Tool Change

Standard Tool Change System.

The tool change system, supplied as standard with the laminate

trimmer on your Microrouter, comprises of four elements:

i) The laminate trimmer threaded shaft, bored to allow fitment of the

cutting tool and collet assembly.

ii) The tapered, tubular, split metal collet, used to hold the cutting tool.

iii) The cutting tool. Your microrouter must only be used with

standard 1/4” or 1/8” shank routing bits, capable of running safely

at speeds of 26,500RPM.

iv) The locking nut, which threads directly onto the laminate trimmer

threaded shaft, securing the cutting tool and collet assembly.

(iv)

Locking

nut.

(ii) Collet.

(i)Laminate

trimmer.

(iii)

Cutting

tool.

Use the 5.0mm allen key to release the

bracket, used to secure the laminate

trimmer on the machine head plate.

Use this end of the C

spanner to hold the

nut around the collet

and tool assembly.

Use this end of the C

spanner to hold the

fixture on the

laminate trimmer

motor shaft.

Metric convertor collets

are available as optional

equipment, to allow

fitment of metric tools.

Note

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 32