Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 62)

62 - Machine Electronics - Section 8 Microrouter CNC Machine User's Manual

8: Accessing the Electrical Panel

The Microrouter electronics are located in the right end of the

machine. Using a 4mm allen (hex) key, remove the eight bolts, then

withdraw the cover plate, to gain access to the electrical panel, as

shown below.

Never attempt to access

the electronic hardware

systems of the machine

with the mains power

switched ON.

Note that hazardous

voltages can still exist

immediately after

switching off the power.

If the machine has

previously been

switched on, wait at least

5 minutes before

attempting to open the

electrical panel access

plate.

Warning

Electrical

Panels.

For access,

remove 8 bolts

(arrowed)

using a 4mm

allen (hex) key.

Remove the electrical

access plate...

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 62