Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 42)

42 - Work Holding - Section 6 Microrouter CNC Machine User's Manual

Engineers

square.

6: Assembling the Work Holding Clamp Rails

To fit the clamp rails in the Microrouter working area:

1) Position the clamp rails inside the machine, between the front

and rear X axis sliderail frames. Align the clamp rails at right

angles to the X axis sliderail frames.

Front X axis

sliderail frame.

Rear X axis

sliderail frame.

Clamp

rails.

2) Slide the bottom U shaped section of the clamp rail assembly

onto both the front and rear X axis sliderail frames, using the two

slots cut into the channel ends. Align the clamp rail so the

outermost allen bolts are positioned over the X axis sliderail

frames.

3) Check the clamp rails lie at

right angles to the X axis

sliderail frames using an

engineers square. Using a

5mm allen key, tighten the

outermost allen bolts

(turning clockwise, when

viewed from above) to lock

the bottom U shaped

sections to X axis sliderail

frame.

X axis

sliderail

frame.

Top U shaped

section of

clamp rail.

Bottom U

shaped section

of clamp rail.

Outermost allen

bolt locks bottom

U shaped section

to X axis sliderail

frame.

Turn 5mm

allen key

clockwise to

tighten bolt.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 93 94

Comentarios a estos manuales

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Compatible Systems MicroRouter 900i