Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 58)

58 - Maintenance - Section 7 Microrouter CNC Machine User's Manual

7: Cleaning the Datum Microswitches

X Axis Datum Microswitch.

The microswitch defining the X axis datum is positioned on the right

end of the rear X axis slideframe assembly, when viewed from the

front of the machine. The microswitch itself is hidden from view by

the extruded metal section, used to cover the drivebelt that connects

the front and rear X axis leadscrews. In order to reach the X axis

microswitch and trigger bolt, you must remove the access panel at

the rear of the machine (see photo below).

Location

Look at right end of rear

slideframe assembly.

Using a soft bristled brush, carefully clean dust and debris away

from the microswitch, to an area where it can be removed using a

vacuum cleaner.

If the microswitch is being cleaned with the X axis at its datum

position, take care not to disturb the position of the trigger bolt attached

to the rear A frame assembly.

X axis

trigger bolt.

X axis

microswitch.

Remove access plate at the rear of the

machine, in order to reach the X axis

microswitch and trigger bolt. Use a 4mm allen

(hex) key to remove the eight secxuring bolts.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 58