Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 14)

14 - CNC Machine Installation - Section 3 Microrouter CNC Machine User's Manual

3: Unpacking & Lifting your Microrouter

Cut the top of the delivery box open and carefully remove any

packaging, strengtheners and bracing struts, where fitted.

To obtain better access to the Microrouter, remove all the sides from

the delivery box, leaving the machine standing on its wooden

delivery pallet.

Remove any support packaging, used to help secure the Microrouter

to its pallet. When fitted, these supporting struts are usually

positioned between the machine feet sections.

Lifting Data.

Microrouter weight 150

KG (330 lb).

Data Panel

Denford does NOT recommend direct lifting of the Microrouter. Use

a professional hoist and a single 500KG (1120 lb), 7 metre (275”)

endless nylon sling to lift the Microrouter, arranged as shown in the

diagram above.

Pass the sling around the middle of the machine casing, spreading the

load around the area of the safety guard door handle. Note that the

machine will be heavier at the righthand end of the cabinet, due the

integrated electronic systems situated here. Perform an assisted lift,

whereby the hoist operator and at least one assistant can manually

monitor the balance and security of the load as is it moved. To

transport the Microrouter over longer distances, use a suitably sized

trolley. Always use sensible lifting precautions in accordance with

Health and Safety Regulations in your establishment.

Use a professional hoist

and a single 500KG

(1120 lb), 7 metre

(275”) endless nylon

sling to lift the machine.

Perform an assisted

lift, whereby the hoist

operator and at least

one assistant can

monitor the balance

and security of the

load.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 14