Compatible Systems MicroRouter 900i Manual de usuario descargar pdf (Pagina 52)

52 - Maintenance - Section 7 Microrouter CNC Machine User's Manual

Y Axis Leadscrew Lubrication.

The Y axis has one leadscrew, fitted between the bases of the front

and rear A slideframe assemblies. Do not confuse the leadscrew

with the two sliderails, which also lie along the same plane.

Run the machine head fully to the back, to gain access to the front

end of the leadscrew. Spray lubrication directly onto the exposed

surface of the leadscrew.

Run the machine head fully to the front, to gain access to the

opposite end of the leadscrew. Spray lubrication directly onto the

remaining surface of the leadscrew.

Finally, run the machine head forwards and backwards along the Y

axis, to distribute lubrication along the full length of the leadscrew.

7: Lubrication of Leadscrews

Location

Look between A

slideframe assemblies.

Lubricate along

the leadscrew

(arrowed).

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 93 94

Sin comentarios

Compatible Systems MicroRouter 900i Manual de usuario Pagina 52